WHY CHOOSE THE MIDGE & MOSQUITO KILLING SYSTEM™ OVER THE COMPETITION?

In hundreds of tests, the Midge & Mosquito Killing System™ (MKS) consistently captured several times as many mosquitoes than any other machine or product, greatly reducing mosquito populations. In actual field tests, the Midge & Mosquito Killing System™ has caught over 7,000 mosquitoes per hour, while competitors' machines in the same test area only captured a few hundred. (Many of these tests were conducted under harsh conditions. Don't expect the same results on your property. You can expect, however, to capture far more mosquitoes with the Midge & Mosquito Killing System™ than any other machine.) 

Other products and machines produce heat with a flame, but do not produce body heat signatures. Only the Midge & Mosquito Killing System™ produces body heat signatures. 

Other products and machines produce carbon dioxide (CO2) by the combustion of the flame, with no scientific release measurements. Only the Midge & Mosquito Killing System™ produces CO2 with scientific release measurements. 

How the Midge & Mosquito Killing System™ works:
1) The Midge & Mosquito Killing System™ uses the mosquito's natural hunting techniques of heat sensing and carbon dioxide detection. It mimics body temperatures and breathing patterns of humans, horses, livestock, poultry, and domesticated pets by the release of carbon dioxide. Through thermal imagery and measured releases of CO2, mosquitoes are attracted to the unit, and captured.

2) A photo sensor turns the unit on at night and off at daylight. For the unit to come on earlier or stay on later, you simply place the cover on the photocell and plug the Midge & Mosquito Killing System™ into a timer for desired settings.

3) Body heat signatures are produced with a heat blanket in the heat chamber cycling every few minutes from 85 degrees to 110 degrees. This feature is performed continuously when unit is running.

4) The CO2 is warmed and released to mimic breathing. When the unit first comes on at night, the CO2 is programmed to release for 5 hours. It cycles on for 2 minutes and off for 1.5 minutes, releasing 750 cc a minute.

5) The fan produces different air currents. One air current creates a vacuum to draw mosquitoes into the unit. Another flows away from the unit carrying and disbursing the attractants away from the unit magnifying the attractants. The fan also acts as a killing mechanism throwing mosquitoes against the inner wall. Plus, mosquitoes are killed when they pass through the electrocution grid.

6) The interior electrocution grid is spaced to create a kill zone when mosquitoes pass through, with a 99% kill ratio. The remains are then expelled through the bottom of the unit and returned to the environment.

7) The capture net is to be used only for selecting the best location for placement of the Midge & Mosquito Killing System™ units. Continued use of the capture net decreases the airflow by 1 mph.